DfR-blog-header.jpg

Hollow Fiber Measurement Technique

Posted by Tom Johnston and Seth Binfield on Jul 25, 2016 4:45:02 PM

Laminate manufacturing in the electronics industry consists of four fundamental steps: conversion of raw materials into molten glass, fiber drawing, fabric weaving, and resin coating. The raw materials of E-glass are batched together in a furnace and melted at temperature in excess of 2500 F. After the molten mixture is deemed homogeneous, it is allowed to flow into a forehearth where it drops through bushing nozzles. While in the nozzle, each drop converts into a glass fiber that is pulled in tension and simultaneously cooled. If the molten glass contains a sufficient level of impurities, air bubbles may become trapped inside the fibers while being drawn through the bushing. These air bubbles, unless very large, do not cause fiber breakage but end up as capillaries in the glass fibers.

Topics: Hollow Fiber, imaging

Read More

Lists by Topic

see all

Have A Question?

Sherlock Free Trial